Order an ODOM

Shipping and tax (if applicable) will be added to all pricing.

The ODOM kit sells for $1200. The boat is manufactured in California except for the mast and booms which are made in the USA. This is what is included:

• A fiberglass hull - several stock colors are available - see the color guide below.

• The hull is fully assembled with the deck on, keelson and rudder tube installed, and servo mounts installed.

• Fiberglass rudder - standard white - as molded: fair and finish to your preference

• Fiberglass keel fin and lead bulb assembled together - standard white fin - as molded: fair and finish to your preference

• Carbon fiber mast

• Carbon fiber booms for the main and jib

• Masthead crane

• Sheet servo arm

• Chainplates installed

• Deck hardware installed

What is not included:

• Transmitter

• Servos

• Receiver

• Battery

• Sails

• Rig hardware - a rig kit is available (see Options)

Options:

• Custom color match (limited pigments mean the match won’t be exact, but we’ll do the best we can): $75

• A different color below the waterline than what is above: $75

• Rig Kit: $90: There are many ways to rig your ODOM. Our Rig Kit offers one of those ways. Fittings are predominantly from SailsEtc. Buy from us, or use this list for ideas when designing your own rig. Here is what is included in our kit:

  • (3) 057X stainless steel bowsie, 7mm x 3mm

  • (3) 057-100 bowsie, 10mm x 3.5mm

  • (3) 057-120 glass-filled nylon bowsie, 12mm x 4mm

  • (4m) D25 Dyneema, blue

  • (10m) D55 Dyneema, white

  • (10m) D75 Dyneema, white

  • (1) gooseneck with standard bearing and extended kicking strap

  • (2) 30-030SL rigging screw (turnbuckle for shrouds)

  • (1) 104 forestay attachment to fit 8mm boom

  • (1) 120-080 headsail swivel to fit 8mm boom

  • (3) 048-080 boom band, with eye, for sheets to fit 8mm boom

  • (1) backstay hook

  • (2) 057-CLEAT cleat for boom

  • (9m) stainless steel wire for shrouds and stays

What you will need to do to make the boat ready to sail:

• Build the rig - hang sails, install shrouds, forestay, backstay, gooseneck, running rigging, boom hardware, etc.

• Install the rudder (very simple)

• Install the keel assembly (very simple)

• Install servos, receiver, and battery (relatively easy)

• Program servos and/or transmitter

ODOM replacement parts:

• $45 Rudder

• $150 Keel (fin and bulb assembled)

• $85 Carbon fiber mast

• $20 Masthead crane

• $17.50 Sail servo control arm - 6061 aluminum

Color Guide

• Most colors are available. We can email you a pdf which is easier to read.